Zhone-IMAC

Used in conjunction with the 883570 PWE card, provides echo cancellation on circuits from 16ms to 128 ms.

Used in conjunction with the 8000-PWE card, provides echo cancellation on circuits from 16ms to 128 ms.

Provides an optical uplink for the IMACS 8000, and also allows for 16 copper facilities and 2 STSs of ethernet traffic to be passed through the IMACS.

Provides single uplink port, either SFP of RJ45 GigE. Supports CESoPSTN to a bookended IMACS with PWE card. Requires CPU-7.5.0 or above CPU firmware. Must order with a 67xxx software version.

The latest software release for the new 8000-CPU. This release supports all features of the IMACS system previously supported, including the 8000-Bridge, 8000-OC3-PT2PT and 8000-PWE cards. System switches of the processor incur less then a 250 mSec hit on credited services.

Supports up to 2 T1 or E1 line interfaces. Can simultaneously support 1 T1 and 1 E1. This card can be configured for either DSX/CEPT or CSU termination mode. Does not require the former DSX/CEPT or CSU line interface modules for proper operation. May operate in CAS or CSS mode. RoHS compliant. This card replaces the 800060 & 801065 WAN cards plus the 81130 and 81230 Line Interface Modules.

Supports up to 2 T1 or E1 line interfaces. Can simultaneously support 1 T1 and 1 E1. This card can be configured for either DSX/CEPT or CSU termination mode. Does not require the former DSX/CEPT or CSU line interface modules for proper operation. May operate in CAS or CSS mode. RoHS compliant. This card replaces the 800060 & 801065 WAN cards plus the 81130 and 81230 Line Interface Modules.

Used with 880160, 880260, 880360/61, or 880370 cross-connect CPUs only. Provides 1:N redundancy for dual WAN cards when plugged into slot W4; acts as redundant mate for dual WAN cards, 801060/65/70?, located in slots W1, W2 or W3. Does not require the former DSX/CEPT or CSU line interface modules for proper operation. The card can be configured for either DSX/CEPT or CSU termination mode. Configuration must match the configuration of cards to be backed up. RoHS compliant

Used with 880160, 880260, 880360/61, or 880370 cross-connect CPUs only. Provides 1:N redundancy for dual WAN cards when plugged into slot W4; acts as redundant mate for dual WAN cards, 801060/65/70?, located in slots W1, W2 or W3. Does not require the former DSX/CEPT or CSU line interface modules for proper operation. The card can be configured for either DSX/CEPT or CSU termination mode. Configuration must match the configuration of cards to be backed up. RoHS compliant

Provides 1:N redundancy for dual WAN cards when plugged into slot W4; acts as redundant mate for dual WAN cards located in slots W1, W2 or W3. The card can be configured for either DSX/CEPT or CSU termination mode, but comes strapped in T1 mode. Configuration must match the configuration of cards to be backed up. RoHS compliant.

Provides basic IP routing functionality with 4 10/100Mbps Ethernet ports. Supports layer 2 encapsulation (HDLC) for routing functions. Supports ARP, RIP, RIP v2, and inverse ARP routing protocols.

Provides an optical uplink for the IMACS, and also allows for 16 copper facilities and 2 STSs of ethernet traffic to be passed through the IMACS. Supported in 7.6.0 and above. Coming 3Q 2016

Provides 128 PPP DS1 link interfaces. Ethernet ports are individually subnet addressable. Must be ordered along with the PRM-883270 IPR*4 hardware. Limited Availability, use the 883275 offering instead.

Provides 1:N redundancy for dual WAN cards when plugged into slot W4; acts as redundant mate for dual WAN cards located in slots W1, W2 or W3. The card can be configured for either DSX/CEPT or CSU termination mode, but comes strapped in E1 mode. Configuration must match the configuration of cards to be backed up. RoHS compliant.

Supports E&M types I, II, IV and V. Normal E&M, transmission only (TO) and E&M R2 modes are supported. May be used with 887160 or 887170 ADPCM and 831060 LBRV compression cards. Extended TX TLP range is added to support dedicated 4-wire modem applications - especially important for data transmission speeds of 19.2Kbps or higher. CE marked for TO mode only.

Two wire interface, supporting signaling modes Foreign Exchange Station (connects to 2-way PBX trunk or key system), Foreign Exchange Software Defined Network (emulates E&M connection to class 4 switches). PLAR (point-to-point unswitched), DPO (1-way trunks from PBX, key system or telephone) and SLC96 (Subscriber Loop Carrier 96). Type settings include variety of loop start and ground start options. Use with 600-Ohm termination facilities. Includes lower power setting for short loops. May be used with 887160 or 887170 ADPCM and 831060 LBRV compression cards. For use with all host codes.

Two wire interface, supporting signaling modes Foreign Exchange Station (connects to 2-way PBX trunk or key system), Foreign Exchange Software Defined Network (emulates E&M connection to class 4 switches), DPT (1-way incoming trunks from PBX, key system or telephone) and MRD (point-to-point unswitched). Signal settings include variety of loop start and ground start options plus R2. Use with 600-Ohm termination facilities. May be used with 887160 or 887170 ADPCM and 831060 LBRV compression cards. This model improves Ground Start mode when used with Host Code v5.1.4 (or higher 5.1.x) only. For loop start lines it can be used with all Host Codes.

Supports E&M types I, II, IV and V. Normal E&M, transmission only (TO) and E&M R2 modes are supported. May be used with 8000-ADPCM compression card. Extended TX TLP range is added to support dedicated 4-wire modem applications - especially important for data transmission speeds of 19.2Kbps or higher. CE marked for TO mode only.

Provides 128 HDLC DS1 link interfaces. Ethernet ports are individually subnet addressable. Must be ordered along with the PRM-883280 IPR*4 hardware. Does not support b7r, fdl, sa4. Interface to any IMACS for management needs to be a full DS0.

Provides CESoPSTN mapping of up to eight T1/E1 facilities into Pseudo-wire technology. Must be ordered along with the PRM-883570 hardware.