Zhone-IMAC

Upgrade the Gold package to a 365 package

Replacement ejectors for IMACS slotted cards.

This cable is used to connect RS232 DTE to the 822060 SRU card.

This cable is used to connect RS232 DTE to the 822060 SRU card.

The 1181 is used to connect up to 8 T1s to the 8920xx, 8921xx, 8922xx, 8923xx interface card. Consult the IMACS Cable and Equipment Guide for more details.

Provides 8 high-speed PPP DS1 link interfaces. Ethernet ports are individually subnet addressable. Must be ordered along with the PRM-883275 IPR*4 hardware. Only supports static routes on the PPP ports. Limited Availability. Use the 66126 firmware for new applications.

Provides 8 high-speed PPP DS1 link interfaces. Ethernet ports are individually subnet addressable. Must be ordered along with the PRM-883275 IPR*4 hardware. Supports RIPv2 on the PPP ports. MUST use CPU load 6.3.6 / 7.4.0 or above to support RIPv2 on PPP ports.

Required for each Analog Bridge Server card (885070). Firmware performs analog bridging on a maximum of 240 DS0s. Requires 885070 Analog Bridge Server card (must be ordered separately). Bridge operates at 0dB, supports E&M data (SCADA) conferencing. Requires v6.2.2 or v7.1.0 CPU or higher.

Provides 128 HDLC DS1 link interfaces. Ethernet ports are individually subnet addressable. Must be ordered along with the 8000-ROUTER-HDLC hardware. Does not support b7r, fdl, sa4. Interface to any IMACS for management needs to be a full DS0.

Supports four outbound switches and four inbound sensors. The outbound switches are used to report internal alarms to external devices by triggering form-C contract closures (on Major or Minor alarms). Triggering may be opening or closing of the contact. The inbound sensors are used to bring foreign indications into the system. External alarms reported by a sensor are listed in the IMACS alarm history file. Requires a -48VDC power source supplied by either a 890220 or 8905 voltage converter.

Supports 3 outbound and 3 inbound sensors. Card performance is identical to the 8401 external alarm card, except that the fourth alarm port on the 840260 can be used only as an outbound system power failure alarm. Requires a -48VDC power source supplied by either a 890220 or 8905 voltage converter.

The 1203F cable is used to connect V.35 DTE to HSU cards.

The 1203X cable is used to connect V.35 DCE to HSU cards.

The 1203X cable is used to connect V.35 DTE to HSU cards.

The 1210 cable is used to connect user cards with Amphenol connectors to M66 blocks or other terminal wiring.

The 1210 cable is used to connect cards with Amphenol connectors to M66 blocks or other terminal wiring.

Supports four outbound switches and four inbound sensors. The outbound switches are used to report internal alarms to external devices by triggering form-C contract closures (on Major or Minor alarms). Triggering may be opening or closing of the contact. The inbound sensors are used to bring foreign indications into the system. External alarms reported by a sensor are listed in the IMACS alarm history file. Requires a -48VDC power source.

The 118320 provides 8 pairs of BNC(F) connectors for connecting up to 8 E1 trunks to an 8920xx, 8921xx, 8922xx, 8923xx interface card. Includes 50 pin (M) to (M) Amphenol cable and is suitable for 891630 IMACS 600 chassis only. Mounts in place of PS cover panel. Includes switch-selectable grounding options.

The 1184 provides 8 pairs of BNC(F) connectors for connecting up to 8 E1 trunks to an 8920xx, 8921xx, 8922xx, 8923xx interface card. Includes 50 pin (M) to (M) Amphenol cable and is suitable for 891830 IMACS 800 chassis only. Mounts in place of PS cover panel. Includes switch-selectable grounding options.

The 1210 SH cable is used to connect cards with Amphenol connectors to M66 blocks or other terminal wiring where a shielded cable is required.